Schliessen

Mehr

Blast Deflector muzzle attachment available

13.02.2017

Even so compensators and flash hiders are quite popular among sport shooters, they also have some disadvantages. If you are lined up on a shooting range next to each other, the neighbor will get the full muzzle blast sometimes including particles and smoke residue. This is not only awkward but could also be dangerous.

When shooting from the prone position, the muzzle blast will raise dust, dirt and even small stones. This is not only irritating, it also blocks the shooters vision and can lead to jams. In these cases, the B&T Blast Deflector is the perfect solution. It is installed on all Rotex-IIA or NATO/Rotex-V compatible flash hiders and compensators (.223/5.56mm and/or .308/7.62 mm) in less than five seconds. The B&T Blast Deflector slows down the hot gases leaving the muzzle and prevents lateral dispersion. Thus any endangerment of neighboring shooters as well as the dispersion of dirt is prohibited. Due to its weight of a little more than 200 gram the B&T Blast Deflector helps to reduce the muzzle movement when shooting , enabling the shooter for fast follow up shots. The B&T Blast Deflector does not reduce the sound signature.

You will find both models here.

Plate Carriers / Chest Rigs

Sortieren nach:

10 Artikel | Seite 1 von 1

The most comfortable plate carrier you’ll ever wear: Engineered from the ground up, the patent pending TacTec Plate Carrier addresses comfort, range of motion, and...

RR-56100

200.00 CHF

Vergleichen

5.11 Tactical Series vest Mesh Concealment MCV one size

  • Built to allow the plain clothed or undercover officer to carry their gear in a comfortable and confidential...

RR-49002

79.50 CHF

Vergleichen

The LBE vest and Thigh Rig are constructed of a reinforced mesh for enhanced breathability and flexiblity.

  • Internal document pockets
  • Hydration pocket on...

RR-58631

110.00 CHF

Vergleichen

Providing operators with options is what our new TacTec Chest Rig was designed for. Includes the capability to mount magazines with either a nylon cover or bungee...

RR-56061

99.50 CHF

Vergleichen

The SPC Chest Platform is designed to be worn with the included H-harness or to integrate into the HSG® SPC Slick Plate Carrier.
The platform will also integrate with...

HSG-40CP00

85.00 CHF

Vergleichen

The Taclite Plate Carrier has been engineered to provide superior flexibility in a lightweight platform. The Taclite Plate Carrier is built from rugged and dependable...

RR-56166

159.50 CHF

Vergleichen

The Fight Strap is a rapidly accessible and quickly deployed magazine bandoleer that can be used for resupply or direct action. Light weight, low profile and easily...

FS-FIGHT-STRAPS

93.00 CHF

Vergleichen

Two-part releasable plate carrier with Velcro back padding, separate front and rear soft and hard armor pockets. High-performance plate carrier in its resilience and...

LT-HL_025_M/L_STGRAU

385.00 CHF

Vergleichen

This plate carrier was conceived as a lightweight, uni-size model with quick-release system on the shoulder straps and waist belt. The carrier is made of extremely tear...

LT-HL_028_M/L_SCHWARZ

385.00 CHF

Vergleichen

Cut edge-to-edge to specifically fit SAPI/ESAPI/SPEAR Cut Plates sizes S-XL, this system can be worn with or without a soft armor panel depending upon ballistic...

FS-12-00026-500

489.50 CHF

Vergleichen

Artikel pro Seite:

Alle Preise werden inkl. Mwst angezeigt

B&T AG

Tempelstrasse 6
CH-3608 Thun
Tel +41 33 334 67 00

B&T Shop Thun

Zelglistrasse 10
CH-3608 Thun
Tel +41 33 334 67 30

B&T Shop Zürich

Widenholzstrasse 1
CH-8304 Wallisellen
Tel +41 43 443 32 00